hei.
Hvordan fjernes plomberingen på en yamaha fz6- naked 2009 mod?
fjerne plombering på Yamaha fz6-n
- supermons
- Administrator
- Posts: 6263
- Joined: 18 Nov 2005 17:32
- MC: Suzuki GSX750
- Location: Hovedstaden
Re: fjerne plombering på Yamaha fz6-n
Søk litt på forumet, så finner du litt informasjon om dette
Jeanette har blant annet oppgradert sin fra lav-effekt.
Jeanette har blant annet oppgradert sin fra lav-effekt.
Re: fjerne plombering på Yamaha fz6-n
ok, jeg ahr søkt litt rundt, men finner lite. jeg kan ekstremt lite om mekking på sykler, menjeg vet at måten de har plombert den på er at gasshåndtaket kun kan vris litt tilbake (ikke helt).
noen link til steder hvor det forklares hvordan det gjøres?
hvem er jeanett?
noen link til steder hvor det forklares hvordan det gjøres?
hvem er jeanett?
-
- Posts: 784
- Joined: 07 Apr 2008 23:24
- MC: 23' BMW F750GS
20' Honda CB650R
18' Suzuki SV 650
12' Yamaha FZ8-S
15' Yamaha MT-07
07' Yamaha FZ6
01' Suzuki Bandit 600
Re: fjerne plombering på Yamaha fz6-n
Jeanette er en av administratorene våre
Om jeg ikke husker alldeles feil, så skrev hun i bloggen sin at leverte hun knallerten sin inn til Yamaha og fikk de til å oppgradere sykkelen henens effektmessig.
Husker jeg riktig Jeanette??
Om jeg ikke husker alldeles feil, så skrev hun i bloggen sin at leverte hun knallerten sin inn til Yamaha og fikk de til å oppgradere sykkelen henens effektmessig.
Husker jeg riktig Jeanette??
Re: fjerne plombering på Yamaha fz6-n
Einaste måten å fjerne plombering på lovlig er vel å levere den inn til autorisert verksted...
- supermons
- Administrator
- Posts: 6263
- Joined: 18 Nov 2005 17:32
- MC: Suzuki GSX750
- Location: Hovedstaden
Re: fjerne plombering på Yamaha fz6-n
Kan vel fjerne det selv, også få det godkjent av verksted etterpå. Penger å spare der, selv om det sikkert er noen verksteder som ikke godtar den (mister fortjeneste).
Re: fjerne plombering på Yamaha fz6-n
Flere som mener at det er en tab som stanser gassrullen, denne kan bøyes til siden slik at den får åpnet mer.
"If you look down onto the engine under the gastank on the left side and move the throttle back and forward you see a wheel that turns this wheel holds the throttle cabel. If you look at this wheel you will see two stops, one that will only make you turn the throttle about a quarter. If you look further back on this wheel you see another stop that will make you turn the throttle even more. This is the original stop that is used on the S2 version. If you just bend away the first stop you will be able to turn the throttle all the way and you will be able to use all the 98 hks of the enginge, it´s as easy as that."
http://www.600riders.com/forum/fz6-mods ... 98hps.html
"If you look down onto the engine under the gastank on the left side and move the throttle back and forward you see a wheel that turns this wheel holds the throttle cabel. If you look at this wheel you will see two stops, one that will only make you turn the throttle about a quarter. If you look further back on this wheel you see another stop that will make you turn the throttle even more. This is the original stop that is used on the S2 version. If you just bend away the first stop you will be able to turn the throttle all the way and you will be able to use all the 98 hks of the enginge, it´s as easy as that."
http://www.600riders.com/forum/fz6-mods ... 98hps.html
Re: fjerne plombering på Yamaha fz6-n
Tråd fra 2011 dette, ikke verstLudvigsen wrote:Flere som mener at det er en tab som stanser gassrullen, denne kan bøyes til siden slik at den får åpnet mer.
"If you look down onto the engine under the gastank on the left side and move the throttle back and forward you see a wheel that turns this wheel holds the throttle cabel. If you look at this wheel you will see two stops, one that will only make you turn the throttle about a quarter. If you look further back on this wheel you see another stop that will make you turn the throttle even more. This is the original stop that is used on the S2 version. If you just bend away the first stop you will be able to turn the throttle all the way and you will be able to use all the 98 hks of the enginge, it´s as easy as that."
http://www.600riders.com/forum/fz6-mods ... 98hps.html
Re: fjerne plombering på Yamaha fz6-n
Haha det så jeg jammen ikke